Tungsten Carbide Ball Peen Blade Straightening and Riveting Hammer

Weighing in at approximately 160 grams (5.6 oz) the Niroc Knockometer was originally designed as a blade straightening tagane hammer, but they are also prized by panel beaters, tool makers, leather workers, saw doctors and tool repairers. They are useful to anyone that needs a small, but very hard hammer. These are han

Weighing in at approximately 160 grams (5.6 oz) the Niroc Knockometer was originally designed as a blade straightening tagane hammer, but they are also prized by panel beaters, tool makers, leather workers, saw doctors and tool repairers. They are useful to anyone that needs a small, but very hard hammer.

These are hand made and every effort and care is made to create a beautiful tool that, with care, will last. The heads are machined from brass bar. Brass is selected due to its relative density being heavier than steel for the same volume and its ability to deform. This “beds” the carbide and reducing the likelihood of chipping or fracturing. The carbide inserts are silver brazed in place with 45% silver brazing alloy, and the process I use ensures the brazing completely retains the insert.

The eye of my hammers is integral to the design and retention of the head on a handle, whether fitted by me or by you. I machine the eye with an hourglass taper, meaning the width of the eye is narrower in the middle of the hammer. When driven onto a tapered handle and wedged, the likelihood of it ever coming loose is slim to none.

Weighing in at approximately 160 grams (5.6 oz) the Niroc Knockometer was originally designed as a blade straightening tagane hammer, but they are also prized by panel beaters, tool makers, leather workers, saw doctors and tool repairers. They are useful to anyone that needs a small, but very hard hammer. These are hand made and every effort and care is made to create a beautiful tool that, with care, will last. The heads are machined from brass bar. Brass is selected due to its relative density being heavier than steel for the same volume and its ability to deform. This “beds” the carbide and reducing the likelihood of chipping or fracturing. The carbide inserts are silver brazed in place with 45% silver brazing alloy, and the process I use ensures the brazing completely retains the insert. The eye of my hammers is integral to the design and retention of the head on a handle, whether fitted by me or by you. I machine the eye with an hourglass taper, meaning the width of the eye is narrower in the middle of the hammer. When driven onto a tapered handle and wedged, the likelihood of it ever coming loose is slim to none.

Cutlery Glossary, Country Knives

Snap-On & Bahco Scrapers Carbide Gasket Scrapers & Blades

Highlights, Handcrafted with precision, Tungsten Carbide Niroc Knockometer, Designed for blade straightening and precision work, Approximately 160

Niroc Tungsten Carbide Ball Peen X Brass Flat Straightening Hammer

ToolPro Replacement Magnetic Hammer Head with Smooth Milled Face

Straightening Hammers – Pops Knife Supply

Blade Straightening Hammer – The Chook – NIROC

Carbide Faced Tagane Ball Peen Hammer With Osage Orange Handle, for Blade Straightening Peening and Riveting - Denmark

FORGED: Making a Knife with Traditional Blacksmith Skills

This is a set of my six most popular hammer faces in three hammers., The Hammers Are, Copper x Teflon, Carbide Flat x Brass Flat, Carbide Ball

Hammer Set x 3 , ball peen, straight peen, brass flat, carbide flat, copper, Teflon

Custom Tungsten Carbide Ball Peen Hammers.

Tungsten Carbide Ball Peen Blade Straightening and Riveting Hammer

Custom Tungsten Carbide Ball Peen Hammers.

Tungsten Carbide Ball Peen Blade Straightening and Riveting Hammer

1.001 Straight Flute & Shank Chucking Reamer HSS - L & I

Flush rivet set

Make your own chef knife. Kit knife Brisa Chef 160mm Kit blank, (Asian Style pre-shaped)

Milwaukee Metal Tech 5-3/8 in. D X 20 mm Ferrous Tungsten Carbide