7/8 Male Flare Union SAE 45 Degree Fitting, Brass - SAE J512 – All

Midland Industries 10112 flare fitting is a brass 7/8 45 degree SAE flare union fitting. Used heavily in the automotive and heavy duty commercial vehicle industry. 7/8 Male Flare Union Specs: Hex - 1.25" Length - 2.72" Type - SAE Flare Union Angle - 45 Degrees Thread Size - 7/8”-14 Tube Outer Diameter - 5/8" SAE J512 B
Midland Industries 10112 flare fitting is a brass 7/8 45 degree SAE flare union fitting. Used heavily in the automotive and heavy duty commercial vehicle industry. 7/8 Male Flare Union Specs: Hex - 1.25 Length - 2.72 Type - SAE Flare Union Angle - 45 Degrees Thread Size - 7/8”-14 Tube Outer Diameter - 5/8 SAE J512 Benefits: Durable Chemically resistant Broad range of operating temperatures SAE 45 degree flare vs SAE 37 degree flare JIC: 45 Degree and 37 degree fittings SAE fittings do share the same thread form. i.e. 7/8-14. But are not compatible in terms of fitment, unless your fitting is a 45/37 which is specifically designed to seat either 45 or 37 degrees. 7/8 Male Flare Union Cross References: AMC 04042-14  7/8 SAE Flare Parker 42F-14  7/8 SAE Flare MAF  42-14  7/8 SAE Flare Champion Brass  U2-14 7/8 SAE Flare Tip: if you don't have a gauge to identify a fittings angle. Fold a sticky note or piece of paper from one corner to the opposite corner, now you have a 45 degree gauge. Stand your fitting on end. if the paper is flush on both the fitting and the surface its sitting on, then your fitting is 45 degrees. 

Parker 42F-14 45 Degree Fitting, Flare to Flare, Brass, Flare Union, 7/8: : Industrial & Scientific

Legines Brass Inverted Flare Fitting, Brake Line Union, 1/2 Tube OD x 1/2 Tube OD, Pack of 2 : Industrial & Scientific

Parker Flare Fittings,Brass,3-3/32 VS149F-12-8

Legines Brass Inverted Flare Fitting, Brake Line Union, 1/2 Tube OD x 1/2 Tube OD, Pack of 2 : Industrial & Scientific

P-WAT-2272Tommy Car Wash

Parker Cap, 45 deg., Brass, Tube, 1/2 In., PK10 640F-8

m.media-/images/I/61pYj+qSREL._AC_UF1000

Tacoma Screw Products 5/8 T x 1/2 NPT SAE 45 Flare Brass Fitting - Male Connector (Tube to Male Pipe)

SAE 45° Flare Fitting, Male Connector, Brass, 1/4 x 1/8, 7/16-20 Thread

Featured Wholesale brass flare fittings for refrigeration For Any Piping Needs

1/8 Male flare Sae 45 to 1/8 Male Npt Straight Adapter Fitting LNG Gas Propane

China Custom E NPT Male SAE Flare Adapter Manufacturers, Suppliers - Stainless Steel E NPT Male SAE Flare Adapter - JIAYUAN

m.media-/images/I/71OUDxm7VTL._AC_UF1000

Midland Industries 10112 flare fitting is a brass 7/8 45 degree SAE flare union fitting. Used heavily in the automotive and heavy duty commercial

7/8 Male Flare Union SAE 45 Degree Fitting, Brass - SAE J512

Festo Mounting Kit, SMBR Series, For Use With SMAT Series, 44% OFF