Luminex GigaCore 10i
$ 17.99 · 4.6 (141) · In stock
GigaCore 10i is a 10 Gigabit Ethernet switch in a ½ 19” package, dedicated to AV integration and installations where there are specific requirements to available space and mounting
Luminex GigaCore 10i
10Gb Network switch for converged AV networks
GigaCore 10i is a 10 Gigabit Ethernet switch in a ½ 19” package, dedicated to AV integration and installations where there are specific requirements to available space and mounting
It is designed to support the most advanced AV protocols out of the box and is the backbone for a converged network, allowing multiple applications to co-exist on the same network.
Specifications
Most suitable applications: Installations
PoE: PoE ++ Optional (up to 150W)
RLinkX (Link redundancy): Yes
Groups (VLAN segmentation): Yes
MultiLinkX (Link aggregation): Yes (With future FW upgrade)
Profile manager: Yes
Memory: Flash 1Gb RAM – 8Mb NOR flash 4Gb EMMC storage
MAC address table: 16384 entries
Address learning / Aging: Self learning, Auto aging
Switching throughput: 56Gbps
Jumbo frames: MTU up to 12000
IGMP support: Yes (V1/V2/V3)
IGMP snooping: Yes, enabled by default
Port sensing: Auto negotiation
Auto crossover: MDI / MDIX
Auto sensing: Full or Half Duplex (Gigabit is Full Duplex)
Connectivity
Ethernet connectivity: 8 x RJ45 connectors (1Gbps))
Fiber connectivity: 2 x SFP+ cages (10Gbps/1Gbps) (independent from other ports)
Ethernet port speed: 1Gbps
Serial: NA
Power
Power connectivity: 1 x IEC (C14)
Power input: 100-240VAC, 50-60Hz
Power consumption: Maximum 40W - Maximum 350W (Depending on configuration)
Fuse: NA
Backup power input: NA
Backup PoE power input: NA
PoE: PoE ++ Optional (up to 150W)
Protocols
Supported protocols: Dante©, RAVENNA/AES67©, Ethersound©, Q-SYS/Q-LAN, sACN, ArtNet, MANet2, HogNet, RTTrPL (BlackTraX), IEEE 802.1p CoS (Class of Service), DiffServ (DSCP), PoE (802.3af) (optional), PoE+ (optional), PoE++ (802.3bt) (optional), IEEE 1588 PTP V2, AVB/MILAN, IEEE 802.1as (gPTP)
Sound protocol compliance: Yes (low jitter)
Ethernet compliance: IEEE 802.2, IEEE 802.3, IEEE 802.3u, IEEE 802.3x Flow Control, IEEE 802.3ab Gigabit Ethernet, IEEE 802.3af PoE(optional), IEEE 802.3at PoE+(optional), IEEE 802.3bt PoE++ 90W(optional), IEEE 802.1p CoS, IEEE 802.1d Spanning Tree, IEEE 802.1w Rapid Spanning Tree, EEE 802.1s Multiple Spanning Tree, IEEE 802.1Q VLAN, IEEE 802.1ab LLDP, IEEE 1588-2008 PtPv2,IEEE 802.1 BA-2011 AVB, IEEE 802.1as (gPTP)
Configuration
Display and jog: NA
Configuration: Network wide configuration through Araneo software, through the built-in web server,
Status LEDs:
Global status LEDs: Device, power, PoE power and mode
Port status LEDs: PoE, groups, link/activity and port speed
Dark mode available
Colored RGB LEDs: Yes
Physical
Mounting: Rack, 100mm x 100mm Vesa spaced mount
Enclosure: Robust metal housing
Dimensions (W x D x H):
220x296,4x43,2 mm
8,66x11,67x1,7 inch
Weight: TBD
Packaging: tbd
Environment:
Operating temperature: 0 to +50 °C
Storage temperature: -10 to +70 °C
Humidity (non condensing): 5 to 95% RH
Noise level @1m: TBD
BTU:
Certificates/Approvals: cSGSus Mark (UL), CE Mark, UKCA Mark, CB certificate, RoHS
Standards: IEC 62368-1, UL 62368-1, CAN/CSA C22.2 No. 62368-1, EN 62368-1, FCC Part 15 CFR 47, CAN/ICES-003, EN 55032, EN 55024
Product codes
LU 01 00089-10G / GigaCore 10i-8x1G-2x10G(SFP+)
LU 01 00089-10G-POE / GigaCore 10i-8x1G-2x10G(SFP+)-PoE++
A.C. Lighting Inc. - Entertainment Lighting Technologies
GigaCore 30i - Luminex
LumiCore 16 and LumiCore 32 - Luminex Network Intelligence
LUMINEX - Audiopole
InfoComm 2023: Luminex Introduces Five New Versions to the GigaCore pro AV Range of Switches – PLSN
Luminex - SONOSS
Luminex - GigaCore 10 - Ethernet & fiber network switch for touring
LUMINEX GigaCore 10 Case incl. Inlay
GigaCore 10t - Luminex