5 Bolt Sending Unit for Tanks Inc. fuel tanks

$ 19.99 · 4.9 (736) · In stock

Five (5) bolt sending unit for use with Tanks Inc. fuel tanks Utilize these sending with your Tanks Inc. tank and factory or aftermarket fuel level gauge. Simply select the appropriate application. Tanks Inc. optional fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep b
Five (5) bolt sending unit for use with Tanks Inc. fuel tanks Utilize these sending with your Tanks Inc. tank and factory or aftermarket fuel level gauge. Simply select the appropriate application. Tanks Inc. optional fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground they work on all 6-24 volt systems positive or negative ground. They do not have a fuel pickup tube built into them as some original senders may have. Made with a high quality ceramic board rheostat. Our fuel senders are available for the following applications. Application Listing: SW - SW gauges - 240-33 Ohms VDO - VDO gauges - 10-180 Ohms GME - GM up to 1964 - 0-30 Ohms GML - GM 1965 and up - 0-90 Ohms ORG - Early Ford & Mopar - 73-10 Ohms The first number of the (Ohms) represents empty and the following is for full.

Fitting Threads = x5 10-32 Thru on 2.112 BOLT CENTERLINEOD = 3.327ID = 1.720Installed height = .300Hole Cut Size = MIN 2.450/ Max 2.750 Images