1.25-12 Jam Nut - Right Hand Thread

1-1/4-12 Grade 5 Yellow Zinc Hex Jam Nut Jam Nut Wrench Size: 1-7/8" Recommended Torque Spec = 723 ft/lbs. Compliance: 3TG: Does not contain 3TG Diameter: 1-1/4" Diameter-Thread Size: 1-1/4"-12 Finish: Yellow Zinc Grade: 5 Material: Steel REACH: Y Specification: ASTM J995 System of Measurement: Imperial (Inch) Thickness: 0.719" Thread: Fine Thread Size: 12 Type: Jam Nut Wrench Size: 1-7/8" Product Weight: 0.361 lbs. Notes: Jam Nuts are often used to lock or "jam" something in place without clamping against another object; Jam Nuts are typically low profile compared to a standard nut. SAE J995 Grade 5 product marking. ANSI B1.1 UNC and UNF Class 2B thread dimensions. Yellow Zinc offers a modest amount of corrosion resistance, slightly higher than that of clear zinc. Recommended Torque Spec = 723 ft/lbs.

M13 x 1.25 thin hex jam right hand thread nut, Approximate thickness: 6 mm, The thickness may vary depending on the production lot number., Quantity

M13 x 1.25 Thin Hex Jam Right hand Thread Nuts 5 Pcs Stainless Steel

1.25in-12 Thread Weld In Bungs (Set of 4) (200955) - Longhorn Fab Shop

Heavy Duty Steel Jam Nut, 1-1/4-12, Left Hand Thread : Industrial & Scientific

MUTEKI SR48 Series Blue 12mm x 1.25 Thread Size Open End Lug Nut with Key (Set 20)

Threaded Tube Inserts 1.25 - 12 1.5 ID Left Hand Thread

Industrial Nuts & Size Chart

Yarış Stili Chromoly 1.25-12 tpi Boru Adaptörü RH TA-276-1, Ballistic Fabrication USA

Clayton Offroad

Jeep Grand Cherokee Long Rear Lower Control Arms 1999-2004, WJ

20 Pcs | M12 x 1.25 12 x 1.25 Thread | Type: Open End Bulge Acorn | Length : 21mm 0.84 | Finish: Zinc | Hex: 3/4 19mm | 1 Piece Construction Always

Wheel Accessories Parts 20 Pcs M12 x 1.25 12 x 1.25 Thread Open End Bulge Acorn

RockJock CE-9114BJN 1.25-12 in. Right Hand Jam Nut